產品中心 Products Center
搜索
全部分類
1/1
瀏覽量:
1000
571364 VAPTREAT 25LTR
瀏覽量:
1000
產品編號
654-571364
數量
-
+
1
產品描述
Product information
Features
- Ensures that the evaporator works at maximum efficiency by keeping heat transfer surfaces free of scale
- The antifoaming properties ensure that distillate quality is high as carry over is eliminated
- Will gradually remove existing scale when dosed at twice the normal rate
- Concentrated, safe liquid, easy and economical dosing
Benefits
- Reduces downtime and maintenance
Specification
General
| Invent Hazard Material (IMO/EU) classification | C-11 |
|---|
Physical properties
| Appearance | Pale yellow |
|---|---|
| Density [g/ml] | 1.1 |
| Form | Liquid |
| pH | 9 in 1% solution |
Technical data
| Compatibility | HD and LD polyethylene, PVC, Polypropylene, Teflon, Buna-N, Neoprene, EPDM, Viton, Tygon |
|---|
Approvals
- NSF International Certifies that this product conforms to the requirements of NSF/ANSI Standard 60 - Drinking Water Treatment Chemicals - Health Effects. Maximum use level according to NSF approval: 30 mg/lit.
- Approved by The Norwegian Food Safety Authority
Directions for use
The specially selected polymers in NALFLEET? Vaptreat combined with the potential scale forming salts in the brine to prevent them from adhering to heat transfer surfaces. These solids are held in suspension and removed with the evaporator brine.
The operating efficiency of the plant is maintained for maximum water production. The intervals between cleaning are greatly increased.
The product to use for acid cleaning is Descalex, which will remove old scale prior to treatment with NALFLEET? Vaptreat.
Evaporators have a tendency to produce foam while operating - the defoaming properties of NALFLEET? Vaptreat will stop this foaming and carry-over will be eliminated. Distilled water quality is maintained.
Dosing method
The standard dosage, applicable to the majority of systems, is 15-30 ml of NALFLEET? Vaptreat per ton of distillate produced. This is based on the rated production capacity of the evaporator.
Example: In a 25 ton/day evaporator. Treatment used = 25 x 30 ml = 750 ml of NALFLEET? Vaptreat per day.
Setting the Flow Rate
The treatment is added to the dosage tank and mixed with water. Example: With the 0.75 litres of NALFLEET? Vaptreat add sufficient water to make up 50 litres of liquid.
Flow rate calculation:
Flowrate = 50 Litres/24 x 60= 35 ml/min setting This will last 24 hours.
A metering pump can also be supplied for use with NALFLEET? Vaptreat if required.
N.B. The brine density should not exceed 1.038 g/cm3. The scaling potential increases rapidly over this level. An increase in the amount of NALFLEET? Vaptreat used will assist in retaining potential scale forming salts in suspension.
For example: If the density rises to 1.050 g/cm3 the dosage should be 60 ml/ton of rated capacity.
產品特性
? 通過保持傳熱表面無垢，確保蒸發器以最高效率工作
? 消泡性能確保餾出物質量高，同時消除了殘留物
? 當以正常速率的兩倍給藥時，將逐漸消除現有的量表
? 濃縮，安全的液體，簡單和經濟的劑量
? NSF根據標準60認證
優勢
? 減少停機時間和維護
Product Number Product name
571364 VAPTREAT 25LTR
使用說明
NALFLEET?Vaptreat中特別選擇的聚合物與鹽水中潛在的水垢形成鹽結合，防止它們粘附在傳熱表面上。將這些固體保持在懸浮液中并用蒸發器鹽水除去。保持機器的運行效率以最大限度地產水。
清潔之間的間隔大大增加。用于酸洗的產品是Descalex，它將在用NALFLEET?Vaptreat處理之前去除舊垢。蒸發器具有在操作時產生泡沫的傾向
- NALFLEET?Vaptreat的消泡性能將阻止這種泡沫，并且將消除殘留物。蒸餾水質量得以保持。
加藥方法
適用于大多數系統的標準劑量是每生產一噸餾出物15-30毫升NALFLEET?Vaptreat。這是基于蒸發器的額定生產能力。
示例：在25噸/天的造水機。使用的投藥量=每天25 x 30 ml = 750 ml NALFLEET?Vaptreat。
設置流量
將處理劑加入劑量罐中并與水混合。示例：使用0.75
升NALFLEET?Vaptreat添加足夠的水來補充50升液
體。.
流量計算：
流速= 50升/ 24 x 60 = 35毫升/分鐘設置這將持續24小時。
也可以提供計量泵以供使用
如果需要，可以使用NALFLEET?Vaptreat。
注：鹽水密度不應超過1.038克/立方厘米。在這個水平上，縮放潛力迅速增加。使用的NALFLEET?Vaptreat量的增加將有助于保留懸浮液中潛在的水垢形成鹽。
例如：如果密度升至1.050克/立方厘米，則劑量應為60毫升/噸額定容量。
版權所有：江蘇爵納貿易有限公司 備案號：蘇ICP備17042192號 網站建設：中企動力 南京